Test/IT/Medical/Lab Equipment
|
|
|
|
*
|
|
|
|
*
|
|
|
Rohde & Schwarz 1332.4869.13
- Internal combiner for port 1 and port 3 for R&S®ZNA43 (4 ports) Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3 (Hardware option. Requires R&S®ZNA43-B21 and R&S®ZNA43-B23)
|
|
|
|
*
|
|
|
Rohde & Schwarz 1332.4846.13
- Internal combiner for port 1 and port 3 for R&S®ZNA26 (4 ports) Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3 (Hardware option. Requires R&S®ZNA26-B21 and R&S®ZNA26-B23)
|
|
|
|
*
|
|
|
Rohde & Schwarz 1332.4830.53
- Direct source monitor access on port 1 and port 3 before the source step attenuator for R&S®ZNA43 (4 ports) requires R&S®ZNA43-B16/-B21/-B23 (Hardware option) (B-option ex factory only, ZNAxx-Uxx for retrofit)
|
|
|
|
*
|
|
|
Rohde & Schwarz 1332.4830.51
- Direct source monitor access on port 1 before the source step attenuator for R&S®ZNA43 requires R&S®ZNA43-B16/-B21 (Hardware option) (B-option ex factory only, ZNAxx-Uxxx for retrofit: ZNAxx-U161 retrofit for 2-port ZNA only. ZNAxx-U163 required for 4...
|
|
|
|
*
|
|
|
Rohde & Schwarz 1332.4823.53
- Direct source monitor access for port 1 and port 3 before the source step attenuator for R&S®ZNA26 (4 ports) requires R&S®ZNA26-B16/-B21/-B23 (Hardware option) (B-option ex factory only, ZNAxx-Uxx for retrofit)
|
|
|
|
*
|
|
|
Rohde & Schwarz 1332.4823.51
- Direct source monitor access for port 1 before the source step attenuator for R&S®ZNA26 requires R&S®ZNA26-B16/-B21 (Hardware option) (B-option ex factory only, ZNAxx-Uxxx for retrofit: ZNAxx-U161 retrofit for 2-port ZNA only. ZNAxx-U163 required for...
|
|
|
|
*
|
|
|
Rohde & Schwarz 1332.4817.12
- Low noise pre-amplifier at receiver port 2, for R&S®ZNA67. (requires R&S®ZNA67-B16, R&S®ZNA67-B32) export restricted
|
|
|
|
*
|
|
|
Rohde & Schwarz 1332.4800.02
- Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
Rohde & Schwarz 1332.4730.67
- Cable Set for ZNA-K9: Combines signals from Port 1 and Port 3 to a two-tone signal at Port 1 (for IM and ZNA-K9 embedded LO GD measurements) for ZNA67, 4-port (1.85mm - 1.85mm)
|
|
|
|